Every display on your network,
from one Mac.
Menuboard Manager MDC finds every Samsung commercial panel on your network and puts power, inputs, volume and 47 more settings in one window — for a single screen or the whole store at once.
Completely free. On the App Store for Mac, iPhone & iPad · No account required
Stop walking the store with a remote.
Samsung commercial panels speak a control protocol over your network. This app speaks it back — no extra hardware, no subscription, no cloud account.
Find every display
Sweep your subnet and the app lists every panel that answers — model, serial and firmware included. Or add one by IP if your network blocks scanning.
Power the whole store
Power on, power off or reboot one display or every display at once. Anything destructive asks first, and tells you exactly what it's about to do.
47 settings, one form
Input source, volume, mute, picture mode and dozens more — applied to a single panel or in bulk, with per-display success and failure reported back.
Save a profile once
Store a named set of settings — "Morning Open", "Evening Close" — and apply it to any display or group in a click instead of rebuilding it by hand.
A real audit trail
Every change is recorded with a timestamp, the display, who did it and exactly what was applied. Filter per display and export to CSV.
Lives in your menu bar
Pin it and every display's state sits in the macOS menu bar, with per-display power and refresh — no window to keep open.
Before you install
- A Mac running macOS 12 or later — or an iPhone or iPad
- Samsung commercial displays on the same network
- Network control switched on at each panel
On each display's remote: Menu → System → Power Control → Remote Configuration. Without it the panel won't answer, and the app will tell you so rather than just finding nothing.
Distributed through the App Store, so it's reviewed by Apple and updates itself. It works on your local network only — nothing is sent to the cloud, and there's no account to create.
Get Menuboard Manager MDC
Free, forever. Install it straight from the App Store — Mac, iPhone and iPad.
- Open the App Store listing and hit Get.
- Launch Menuboard Manager MDC from Applications, or your Home Screen.
- On first scan, you'll be asked for Local Network permission — allow it, or the app can't reach your displays.